Función de seguridad y protección del generador solar

1.Protección contra sobretensión de la carga solar:

La ubicación de esta placa se muestra a continuación:

Características:La protección contra sobrevoltaje se inicia cuando el voltaje de entrada de CC solar supera los 24 V, y la función de protección contra sobrevoltaje se activará dentro del rango de voltaje de entrada de CC de 25-100 V. Evite los riesgos de seguridad.

Con esta función, aunque los consumidores conectan estecentral eléctricaal sistema solar de la azotea (voltaje superior a 25 V, potencia superior a 200 W), no provocará ningún riesgo de incendio, humo, etc.

Sin esta función, el voltaje o la corriente de carga excesivos pueden provocar un incendio o una explosión debido al sobrecalentamiento del módulo de carga y la batería de litio, como se muestra en la siguiente figura (comentarios del cliente sobre otras marcas).central eléctrica):

2.Sistema de gestión de batería BMS permite la carga equilibrada:

se adapta carga en tres etapas: carga de corriente constante, carga de voltaje constante y carga flotante, promedio de la corriente de carga de cada grupo, en caso de que la carga desequilibrada de cada cadena de celdas provoque un sobrecalentamiento, falso electricidad y no completamente cargada, mejorando la vida útil de la batería y evitando accidentes de seguridad.

Si no tiene esta función, es posible que se presenten los siguientes problemas de seguridad.pasar(con respecto a otros productos similares en el mercado según los comentarios de algunos de nuestros clientes)

problemas1: Unidad no FcompletoCacosado

Según algunos consumidoress feedbacks, the battery power of the below solar generator not rise but fall during the charging process, and cannot be charged to 100%.This is caused by the lack of a BMS management system, resulting in an unbalanced charging.

Issures 2:Overheating

Since there is no BMS battery management system, the voltage is not balanced during charging, and the string of batteries with too high voltage is likely to cause overheating ,even cause a safety accident.

Issure 3:False Electricity

Since there is no BMS battery management system, the voltage is unbalanced during charging, The voltage of a few string of batteries are too low,others stings are too high, resulting in false electricity . Even though the LCD display has shown that the battery reaches 100%, it is found that the power consumption is extremely fast in actual use.

3.Auto sleep energy saving feature

Auto sleep function,lower power consumption,reflect energy saving and humanization of the product.

When the product detects that your connected device consumes less than 1W in 30mins, it will automatically enter into Energy-saving sleep mode, and shut down the work.

If you need reawake it, you must repress the product AC switch button and ensure that the connected device is higher than 1W.

Adding this mode is : better storage of electricity and avoid the power consumption under no-load conditions in any case.

For example:

* When you use this product at home to charge your electronic devices, you forget to turn off its power switch, and then go out with friends or travel outside.

When you come back from your trip, there is no electricity in home, you want to use this product for emergency charging, and you find that the power of this product is up, and you can not get any power.

With this feature mode, you will no longer to worry about this anymore !

4.CPIC Product Liability Insurance, Escort Our Products:

When the product encounters force majeure factors during transportation,

such as natural disasters: typhoon, tsunami, flood, hail etc, which cause property losses;

If the product quality defects cause property losses or accidents,

Insurnace company will give us a high compensation amount according to the severity of the accident.

We will print our corresponding product insurance number on this products.

With this insurance, you can start your sales without any worries.

5.Easy to assemble & disassemble for the whole device, which is best convenient for your after-sales, and each part has its separate protection function: