|BRIDNA PPS300-3 Pro 300W Technical Specification|
|Battery Capacity||Lithium-ion 296Wh(20Ah/14.8V)|
|AC Input Charging||AC100-240V to 19V/3A|
|Car Input Charging||DC12V~24V/7A Max|
|Solar Input Charging||DC12V~24V/7A Max|
|USB-C Charging||PD100W Max|
|DC Output||1 * Cigarette Lighter+|
|2 * DC5521 Rated Output|
|12.8~16.5V/10A (Total 10A Max)|
|AC Output Waveform||Pure sine wave|
|AC Output Power||300W MAX|
|AC Output Voltage &Frequency||110V±10%, 60Hz±5%|
|USB Output||USB-C1: PD100W Max (5V5A&9V5A&12V5A&15V5A&20V5A PD3.0)|
|USB-C2: PD27W Max (5V3A&9V3A&12V2.25A PD3.0)|
|USB-A1: QC24W Max (5V3A&9V2A&12V2A QC3.0)|
|USD-A2: QC24W Max (5V3A&9V2A&12V2A& QC3.0)|
|LED Light||2W Max, 3 Levels(L/M/H)+SOS+Strobe|
|Safety Protection||Short Circuit|
|Operation Temperature||0℃~40℃ / 32℉~104℉|
|Battery Charge Cycle||≥1000 times DOD≥80%|
|Weight||3.2KG / 7.05lbs|
|Package Content||1 * AC Power Adapter|
|1 * AC Power Cord|
|1 * DC Car Charger Cable|
|1 * User Manual|
|Bundle Content||1 * PPS300-3 Pro 300W Portable Power Station|
|1 * SP120 120W Solar Charging Panel|
Instructions for use:
- Run time=296Wh*90%(conversion rate)/Your device's power(Watts).
- Support charging all electronic devices within 300W.
- It is recommended to use a DC port instead of an AC port to power your CPAP machine.
- The usage time for refrigeration machines with compressors mainly depends on the temperature setting and start frequency of compressors, it’s usually lasting a longer time than a certain reference time.
- Remaining usage time is dependent on output wattage and what item(s) are being charged.
- This unit supports full pass-through charging, so you can charge it and run your gear at the same time. Remaining wattage and time will priority to display output power and usage time while charging and discharging simultaneously.
- The charging times calculated above are for reference only. The actual usage time will depend on the power of the connected devices.
To avoid battery consumption caused by forgetting to turn off the output when not in use, the unit will switch to the Auto-Sleep Mode. That is when the unit detects that no device is connected or the connected devices are less than or equal to 2W, it will automatically shut off after 1 hour. Refer to the table below for more details:
|AC Output||≤2W||The unit will automatically shut down after 1 hours|
|DC Output||≤2W||The unit will automatically shut down after 1 hours|
|USB Output||≤2W||The unit will automatically shut down after 1 hours|
|Car Output||≤2W||The unit will automatically shut down after 1 hours|
- The power station has a built-in lithium battery that is highly sensitive to high temperatures. It should be kept away from high-heat sources.
- Keep away from moisture or water.
- Do not disassemble, microwave, puncture, incinerate or insert foreign objects into the power station.
- Do not crush, drop, or place heavy objects on top of the device.
- Do not use the product if damaged or punctured.
- If not in regular use, charge the power station every other month to remain fully prepared for an emergency.
|The unit can not charging from AC wall outlets||AC charging fault||1. Please ensure to use the original AC adapter.|
|2. Please check if the AC wall plug is correctly connected.|
|If still not solved, please contact our after-sale service.|
|The unit can not charging from solar panel||DC solar charging fault||1. Please ensure the solar panel is correctly connected under the user manual.|
|2. Please ensure the specification of connected solar panels meets the specified standard.|
|3. Please ensure the solar panel is in a sunlight environment.|
|If still not solved, please contact our after-sale service.|
|LCD Screen icon flash
|Over-current protection||Over-current protectionResolve the problem by pulling out plugs or removing electrical devices, then the unit can recover itself after restarting the corresponding switch.
If still not solved, please contact our after-sale service.
|Short circuit protection|
|High-Temperature icon continuously appears||High-temperature warning||The power station can recover itself after the battery is cooled.|
BRIDAN PPS300-3 Pro Portable Power Station
Life Cycles:1,000+ Cycles to 80% Original Capacity
Shelf-life:Recharge to 80% Every 3-6 Months
Management System:MPPT Controller, BMS, UPS, etc.
AC Output:2 × 110V±10%, 60Hz±5%
Inverter Type:Pure sine wave
1 × PD100W Max (5V5A & 9V5A & 12V5A & 15V5A & 20V5A & PD3.0)
1 × PD27W Max (5V3A & 9V3A & 12V2.25A PD3.0)
2 × QC24W Max (5V3A & 9V2A & 12V2A QC3.0)
2 × 12.8V~16.5V/10A Rated Output(DC5521)
1 × Cigarette Lighter+
USB-C Input:PD100W Max Charging
AC Charging(power): ≈6-7 Hours
AC + PD Charging:≈2.5-3.5 Hours
DC 12V Car Charging:≈3.5-4.5 Hours
120WSolar Panel≈3-4 Hours
Lighting Power:2W Max
Lighting Mode:3 Levels(L/M/H)+SOS+Strobe
Weight:7.05b (3.2 kg)
Dimensions (LxWxH):9 x 5.5 x 6.6 in / 23 x 14 x 16.9cm
Operating Temperature:14-104℉ / -10-40℃
Storage Temperature:14-104℉ / -10-40℃
MSDS, UN38.3, CE-LVD, CE-EMC, ROHS, IC, PSE, FCC, UKCA-LVD, UKCA-EMC, ETL, METI
1 × AC Power Adapter
1 × AC Power Cord
1 × DC Car Charger Cable
1 × User Manual
Q:Which electronic appliances can I use with the unit?
A:All electronic devices within 300W
Q:What kind of solar panel should be selected to recharge the unit?
A:We recommend a 100W~120W solar panel with the Optimum Operating Voltage(Vmp) of DC13V-24V. Never use a higher than DC24V solar panel to recharge the power station. You need to purchase a solar charging panel separately from the bridna.com store to solar charge the device.
Q:Why does the unit have the Auto-Sleep Mode?
A:To avoid battery consumption caused by forgetting to turn off the output when not in use, the unit will switch to the Auto-Sleep Mode. That is when the unit detects that no device is connected or the connected devices are less than or equal to 2W, it will automatically shut off after 1 hour.
Q:What kind of "mini-fridge" or "mini cooler" can the unit do?
A:The AC continuous output of the unit is 300W and the battery capacity is 296Wh. It can power any device within 300W. However, the usage time depends on the power of the fridge and the fridge compressor. Normally the power of the compressor is three times that of the fridge.
Q:Is the unit water/weather resistant?
A:NO.Do not expose the unit to water
Q:Can the batteries be replaceable or upgradeable?
A:NO.Batteries are built in. NOTE-Opening the unit will void the warranty
Q:Is there a way to disable a port group?
A:YES.Clicking the button on the port group will disable/enable it. When enabled, an icon appears on the LCD screen
Q:How long will a single charge last without using the unit?
A:3-5 Months.But we suggest you charge the power station every 2 months if not used for a long time. It's better to keep it full energy in case of emergency usage
Q:Does this device support pass-through charging?
A:YES.You can simultaneously charge other devices while recharging the power station.
Q:Can this unit jumpstart a car battery?
Used this several times now. Charges tablets with no issue with plenty of power to spare. I've used it with a CPAP. Based on what I've tried it looks like I can get two nights of use on one charge for my CPAP before needing a recharge. I'm still researching a decent solar panel to add to the setup.
Bought this to take camping. Fantastic product, worked as expected. Surprisingly well built. Very highly recommended.
This product is as described no issues using or charging it up for 1st use. Worked great for 8 hours and still had enough power for way more time only used on tablets phones and bluetooth speaker also plugged and used a small laptop PC for 3 hours no problem.