BRIDNAR｜LFP Series 51.2V LiFePO4 Energy Storage Battery Unlock a New Experience of Full-Scenario Off-Grid Energy Storage

As the core energy storage product of BRIDNAR, the LFP Series is based on a 51.2V standard high-voltage platform, covering three capacity ranges: 100Ah, 200Ah, and 300Ah, corresponding to 5kWh, 10kWh, and 15kWh system capacities. It can flexibly adapt to different scales of power demand, whether it is daily household backup, long-term RV travel, or off-grid power supply for outdoor base stations, farms, and pastures, it can accurately match and achieve stable power supply.

Safety is the core bottom line of energy storage products. The LFP Series builds a comprehensive protection system from cell to system. The product adopts LiFePO4 battery cells with stable chemical structure, high temperature resistance, and low risk of thermal runaway, avoiding potential safety hazards from the source. At the same time, it integrates nano-coating and self-healing technology to build an exclusive safety barrier for the cells, further improving battery reliability and service life. Equipped with an intelligent BMS management system, it can real-time monitor core parameters such as battery voltage, current, and temperature, realizing multiple protections including overcharge, over-discharge, over-current, short circuit, and high temperature. It has also passed CE and UN38.3 authoritative certifications, fully meeting global safety standards for transportation and use, ensuring peace of mind in every power use.

Long-lasting durability is one of the core advantages of the LFP Series, greatly reducing the user's whole-cycle use cost. The product undergoes 4 times static standing screening and 8 rounds of consistency sorting, resulting in excellent cell consistency and effectively slowing down system attenuation. The cycle life can reach more than 6000 times (based on 0.5C charge/discharge and 80% depth of discharge standard). Calculated at 1 cycle per day, it can be used stably for more than 16 years, far exceeding the level of traditional energy storage batteries. At the same time, it adopts a maintenance-free design, eliminating the need for cumbersome later operation and maintenance, further saving time and labor costs, and balancing practicality and economy.

The characteristics of flexible compatibility and convenient deployment enable the LFP Series to adapt to more scenarios and lower the use threshold. The product supports RS485, RS232, and CAN multi-protocol communication, which can perfectly match most mainstream lithium battery inverters on the market, requiring no additional adaptation and debugging, and can be used immediately. It supports parallel expansion of up to 16 modules, allowing users to flexibly increase or decrease capacity according to power demand, covering all scenarios from small household use to medium-sized off-grid power stations. The installation method is flexible, which can be wall-mounted or floor-mounted, and can be deployed only in indoor scenarios. Equipped with natural convection heat dissipation design and IP40 protection level, it is not afraid of complex environments, with simple installation and convenient operation and maintenance.

Intelligent management functions make energy storage use more worry-free. The product is equipped with SOC power display and LED status screen, so that the remaining battery power and operating status are clear at a glance, which can be easily mastered without professional operation. It supports real-time online monitoring. When an abnormality occurs in the battery, the system will automatically issue an intelligent alarm to avoid operational risks in advance and ensure the continuous and stable operation of the power system. In addition, the product has a wide temperature working capacity, which can operate normally in the environment of -20℃ to +65℃, and the maximum working altitude can reach 4000 meters (derating is required above 2000 meters), adapting to the environmental needs of different regions, and fearless of severe cold, extreme heat and high altitude challenges.

The strong product strength comes from BRIDNAR's profound technical accumulation and strict quality control. BRIDNAR (Shenzhen Segre Electronics Co., Ltd.), established in 2012, is a national high-tech enterprise specializing in the R&D, production and sales of energy storage power stations and power inverters. It has more than 14 years of industry experience, an 8500㎡ modern factory, and has passed ISO9001:2015 quality system certification. The company's monthly production capacity reaches more than 80,000 units/sets, holding more than 200 domestic and foreign invention and appearance patents. The products have passed multiple global certifications such as ETL, PSE, SAA, FCC, CE, and ROHS, and have long provided OEM production services for high-end overseas brands, winning recognition from global customers with excellent quality.